mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-01-26 18:43:33 -05:00
net: phy: mediatek-ge-soc: follow netdev LED trigger semantics
Only blink if the link is up on a LED which is programmed to also
indicate link-status.
Otherwise, if both LEDs are in use to indicate different speeds, the
resulting blinking being inverted on LEDs which aren't switched on at
a specific speed is quite counter-intuitive.
Also make sure that state left behind by reset or the bootloader is
recognized correctly including the half-duplex and full-duplex bits as
well as the (unsupported by Linux netdev trigger semantics) link-down
bit.
Fixes: c66937b0f8
("net: phy: mediatek-ge-soc: support PHY LEDs")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
f2a904107e
commit
5b5f724b05
1 changed files with 26 additions and 17 deletions
|
@ -216,6 +216,9 @@
|
|||
#define MTK_PHY_LED_ON_LINK1000 BIT(0)
|
||||
#define MTK_PHY_LED_ON_LINK100 BIT(1)
|
||||
#define MTK_PHY_LED_ON_LINK10 BIT(2)
|
||||
#define MTK_PHY_LED_ON_LINK (MTK_PHY_LED_ON_LINK10 |\
|
||||
MTK_PHY_LED_ON_LINK100 |\
|
||||
MTK_PHY_LED_ON_LINK1000)
|
||||
#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
|
||||
#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
|
||||
#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
|
||||
|
@ -231,6 +234,12 @@
|
|||
#define MTK_PHY_LED_BLINK_100RX BIT(3)
|
||||
#define MTK_PHY_LED_BLINK_10TX BIT(4)
|
||||
#define MTK_PHY_LED_BLINK_10RX BIT(5)
|
||||
#define MTK_PHY_LED_BLINK_RX (MTK_PHY_LED_BLINK_10RX |\
|
||||
MTK_PHY_LED_BLINK_100RX |\
|
||||
MTK_PHY_LED_BLINK_1000RX)
|
||||
#define MTK_PHY_LED_BLINK_TX (MTK_PHY_LED_BLINK_10TX |\
|
||||
MTK_PHY_LED_BLINK_100TX |\
|
||||
MTK_PHY_LED_BLINK_1000TX)
|
||||
#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
|
||||
#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
|
||||
#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
|
||||
|
@ -1247,11 +1256,9 @@ static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
|
|||
if (blink < 0)
|
||||
return -EIO;
|
||||
|
||||
if ((on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 |
|
||||
MTK_PHY_LED_ON_LINK10)) ||
|
||||
(blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX |
|
||||
MTK_PHY_LED_BLINK_10RX | MTK_PHY_LED_BLINK_1000TX |
|
||||
MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX)))
|
||||
if ((on & (MTK_PHY_LED_ON_LINK | MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX |
|
||||
MTK_PHY_LED_ON_LINKDOWN)) ||
|
||||
(blink & (MTK_PHY_LED_BLINK_RX | MTK_PHY_LED_BLINK_TX)))
|
||||
set_bit(bit_netdev, &priv->led_state);
|
||||
else
|
||||
clear_bit(bit_netdev, &priv->led_state);
|
||||
|
@ -1269,7 +1276,7 @@ static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
|
|||
if (!rules)
|
||||
return 0;
|
||||
|
||||
if (on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 | MTK_PHY_LED_ON_LINK10))
|
||||
if (on & MTK_PHY_LED_ON_LINK)
|
||||
*rules |= BIT(TRIGGER_NETDEV_LINK);
|
||||
|
||||
if (on & MTK_PHY_LED_ON_LINK10)
|
||||
|
@ -1287,10 +1294,10 @@ static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
|
|||
if (on & MTK_PHY_LED_ON_HDX)
|
||||
*rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
|
||||
|
||||
if (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX | MTK_PHY_LED_BLINK_10RX))
|
||||
if (blink & MTK_PHY_LED_BLINK_RX)
|
||||
*rules |= BIT(TRIGGER_NETDEV_RX);
|
||||
|
||||
if (blink & (MTK_PHY_LED_BLINK_1000TX | MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX))
|
||||
if (blink & MTK_PHY_LED_BLINK_TX)
|
||||
*rules |= BIT(TRIGGER_NETDEV_TX);
|
||||
|
||||
return 0;
|
||||
|
@ -1323,15 +1330,19 @@ static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
|
|||
on |= MTK_PHY_LED_ON_LINK1000;
|
||||
|
||||
if (rules & BIT(TRIGGER_NETDEV_RX)) {
|
||||
blink |= MTK_PHY_LED_BLINK_10RX |
|
||||
MTK_PHY_LED_BLINK_100RX |
|
||||
MTK_PHY_LED_BLINK_1000RX;
|
||||
blink |= (on & MTK_PHY_LED_ON_LINK) ?
|
||||
(((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10RX : 0) |
|
||||
((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100RX : 0) |
|
||||
((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000RX : 0)) :
|
||||
MTK_PHY_LED_BLINK_RX;
|
||||
}
|
||||
|
||||
if (rules & BIT(TRIGGER_NETDEV_TX)) {
|
||||
blink |= MTK_PHY_LED_BLINK_10TX |
|
||||
MTK_PHY_LED_BLINK_100TX |
|
||||
MTK_PHY_LED_BLINK_1000TX;
|
||||
blink |= (on & MTK_PHY_LED_ON_LINK) ?
|
||||
(((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10TX : 0) |
|
||||
((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100TX : 0) |
|
||||
((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000TX : 0)) :
|
||||
MTK_PHY_LED_BLINK_TX;
|
||||
}
|
||||
|
||||
if (blink || on)
|
||||
|
@ -1344,9 +1355,7 @@ static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
|
|||
MTK_PHY_LED0_ON_CTRL,
|
||||
MTK_PHY_LED_ON_FDX |
|
||||
MTK_PHY_LED_ON_HDX |
|
||||
MTK_PHY_LED_ON_LINK10 |
|
||||
MTK_PHY_LED_ON_LINK100 |
|
||||
MTK_PHY_LED_ON_LINK1000,
|
||||
MTK_PHY_LED_ON_LINK,
|
||||
on);
|
||||
|
||||
if (ret)
|
||||
|
|
Loading…
Add table
Reference in a new issue