Manivannan Sadhasivam 7bac656875 scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence() ... PHY might already be powered on during ufs_qcom_power_up_sequence() in a couple of cases: 1. During UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH quirk 2. Resuming from spm_lvl = 5 suspend In those cases, it is necessary to call phy_power_off() and phy_exit() in ufs_qcom_power_up_sequence() function to power off the PHY before calling phy_init() and phy_power_on(). Case (1) is doing it via ufs_qcom_reinit_notify() callback, but case (2) is not handled. So to satisfy both cases, call phy_power_off() and phy_exit() if the phy_count is non-zero. And with this change, the reinit_notify() callback is no longer needed. This fixes the below UFS resume failure with spm_lvl = 5: ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5 ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume returns -5 ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error -5 Cc: stable@vger.kernel.org # 6.3 Fixes: baf5ddac90 ("scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device") Reported-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com> Tested-by: Amit Pundir <amit.pundir@linaro.org> # on SM8550-HDK Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-1-63c4b95a70b9@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>		2025-01-02 13:00:16 -05:00
..
ufs.h
ufs_quirks.h
ufshcd.h	scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()	2025-01-02 13:00:16 -05:00
ufshci.h
unipro.h