mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-01-24 09:13:20 -05:00
17894c2a7a
- Snapshot buffer issues
1. When instances started allowing latency tracers, it uses
a snapshot buffer (another buffer that is not written to
but swapped with the main buffer that is). The snapshot buffer
needs to be the same size as the main buffer. But when the
snapshot buffers were added to instances, the code to make
the snapshot equal to the main buffer still was only doing it
for the main buffer and not the instances.
2. Need to stop the current tracer when resizing the buffers.
Otherwise there can be a race if the tracer decides to make
a snapshot between resizing the main buffer and the snapshot
buffer.
3. When a tracer is "stopped" in disables both the main buffer
and the snapshot buffer. This needs to be done for instances
and not only the main buffer, now that instances also have
a snapshot buffer.
- Buffered event for filtering issues
When filtering is enabled, because events can be dropped often,
it is quicker to copy the event into a temp buffer and write that
into the main buffer if it is not filtered or just drop the event
if it is, than to write the event into the ring buffer and then
try to discard it. This temp buffer is allocated and needs special
synchronization to do so. But there were some issues with that:
1. When disabling the filter and freeing the buffer, a call to all
CPUs is required to stop each per_cpu usage. But the code
called smp_call_function_many() which does not include the
current CPU. If the task is migrated to another CPU when it
enables the CPUs via smp_call_function_many(), it will not enable
the one it is currently on and this causes issues later on.
Use on_each_cpu_mask() instead, which includes the current CPU.
2. When the allocation of the buffered event fails, it can give
a warning. But the buffered event is just an optimization
(it's still OK to write to the ring buffer and free it).
Do not WARN in this case.
3. The freeing of the buffer event requires synchronization.
First a counter is decremented to zero so that no new uses
of it will happen. Then it sets the buffered event to NULL,
and finally it frees the buffered event. There's a synchronize_rcu()
between the counter decrement and the setting the variable to
NULL, but only a smp_wmb() between that and the freeing of the
buffer. It is theoretically possible that a user missed seeing
the decrement, but will use the buffer after it is free. Another
synchronize_rcu() is needed in place of that smp_wmb().
- ring buffer timestamps on 32 bit machines
The ring buffer timestamp on 32 bit machines has to break the 64 bit
number into multiple values as cmpxchg is required on it, and a
64 bit cmpxchg on 32 bit architectures is very slow. The code use
to just use two 32 bit values and make it a 60 bit timestamp where
the other 4 bits were used as counters for synchronization. It later
came known that the timestamp on 32 bit still need all 64 bits in
some cases. So 3 words were created to handle the 64 bits. But issues
arised with this:
1. The synchronization logic still only compared the counter
with the first two, but not with the third number, so the
synchronization could fail unknowingly.
2. A check on discard of an event could race if an event happened
between the discard and updating one of the counters. The
counter needs to be updated (forcing an absolute timestamp
and not to use a delta) before the actual discard happens.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZXIP5hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJxAQDXBZwBUFQjWqZHLJn0S9aaz5FggkeR
RmlsOMND0PXcjwD+N6U905i553ehu3SSyOP+5svoi0hyCB2qhj3ZF0LzZQU=
=us1V
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Snapshot buffer issues:
1. When instances started allowing latency tracers, it uses a
snapshot buffer (another buffer that is not written to but swapped
with the main buffer that is). The snapshot buffer needs to be the
same size as the main buffer. But when the snapshot buffers were
added to instances, the code to make the snapshot equal to the
main buffer still was only doing it for the main buffer and not
the instances.
2. Need to stop the current tracer when resizing the buffers.
Otherwise there can be a race if the tracer decides to make a
snapshot between resizing the main buffer and the snapshot buffer.
3. When a tracer is "stopped" in disables both the main buffer and
the snapshot buffer. This needs to be done for instances and not
only the main buffer, now that instances also have a snapshot
buffer.
- Buffered event for filtering issues:
When filtering is enabled, because events can be dropped often, it is
quicker to copy the event into a temp buffer and write that into the
main buffer if it is not filtered or just drop the event if it is,
than to write the event into the ring buffer and then try to discard
it. This temp buffer is allocated and needs special synchronization
to do so. But there were some issues with that:
1. When disabling the filter and freeing the buffer, a call to all
CPUs is required to stop each per_cpu usage. But the code called
smp_call_function_many() which does not include the current CPU.
If the task is migrated to another CPU when it enables the CPUs
via smp_call_function_many(), it will not enable the one it is
currently on and this causes issues later on. Use
on_each_cpu_mask() instead, which includes the current CPU.
2.When the allocation of the buffered event fails, it can give a
warning. But the buffered event is just an optimization (it's
still OK to write to the ring buffer and free it). Do not WARN in
this case.
3.The freeing of the buffer event requires synchronization. First a
counter is decremented to zero so that no new uses of it will
happen. Then it sets the buffered event to NULL, and finally it
frees the buffered event. There's a synchronize_rcu() between the
counter decrement and the setting the variable to NULL, but only a
smp_wmb() between that and the freeing of the buffer. It is
theoretically possible that a user missed seeing the decrement,
but will use the buffer after it is free. Another
synchronize_rcu() is needed in place of that smp_wmb().
- ring buffer timestamps on 32 bit machines
The ring buffer timestamp on 32 bit machines has to break the 64 bit
number into multiple values as cmpxchg is required on it, and a 64
bit cmpxchg on 32 bit architectures is very slow. The code use to
just use two 32 bit values and make it a 60 bit timestamp where the
other 4 bits were used as counters for synchronization. It later came
known that the timestamp on 32 bit still need all 64 bits in some
cases. So 3 words were created to handle the 64 bits. But issues
arised with this:
1. The synchronization logic still only compared the counter with
the first two, but not with the third number, so the
synchronization could fail unknowingly.
2. A check on discard of an event could race if an event happened
between the discard and updating one of the counters. The counter
needs to be updated (forcing an absolute timestamp and not to use
a delta) before the actual discard happens.
* tag 'trace-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Test last update in 32bit version of __rb_time_read()
ring-buffer: Force absolute timestamp on discard of event
tracing: Fix a possible race when disabling buffered events
tracing: Fix a warning when allocating buffered events fails
tracing: Fix incomplete locking when disabling buffered events
tracing: Disable snapshot buffer when stopping instance tracers
tracing: Stop current tracer when resizing buffer
tracing: Always update snapshot buffer size
|
||
|---|---|---|
| .. | ||
| rv | ||
| blktrace.c | ||
| bpf_trace.c | ||
| bpf_trace.h | ||
| error_report-traces.c | ||
| fgraph.c | ||
| fprobe.c | ||
| ftrace.c | ||
| ftrace_internal.h | ||
| Kconfig | ||
| kprobe_event_gen_test.c | ||
| Makefile | ||
| pid_list.c | ||
| pid_list.h | ||
| power-traces.c | ||
| preemptirq_delay_test.c | ||
| rethook.c | ||
| ring_buffer.c | ||
| ring_buffer_benchmark.c | ||
| rpm-traces.c | ||
| synth_event_gen_test.c | ||
| trace.c | ||
| trace.h | ||
| trace_benchmark.c | ||
| trace_benchmark.h | ||
| trace_boot.c | ||
| trace_branch.c | ||
| trace_btf.c | ||
| trace_btf.h | ||
| trace_clock.c | ||
| trace_dynevent.c | ||
| trace_dynevent.h | ||
| trace_entries.h | ||
| trace_eprobe.c | ||
| trace_event_perf.c | ||
| trace_events.c | ||
| trace_events_filter.c | ||
| trace_events_filter_test.h | ||
| trace_events_hist.c | ||
| trace_events_inject.c | ||
| trace_events_synth.c | ||
| trace_events_trigger.c | ||
| trace_events_user.c | ||
| trace_export.c | ||
| trace_fprobe.c | ||
| trace_functions.c | ||
| trace_functions_graph.c | ||
| trace_hwlat.c | ||
| trace_irqsoff.c | ||
| trace_kdb.c | ||
| trace_kprobe.c | ||
| trace_kprobe_selftest.c | ||
| trace_kprobe_selftest.h | ||
| trace_mmiotrace.c | ||
| trace_nop.c | ||
| trace_osnoise.c | ||
| trace_output.c | ||
| trace_output.h | ||
| trace_preemptirq.c | ||
| trace_printk.c | ||
| trace_probe.c | ||
| trace_probe.h | ||
| trace_probe_kernel.h | ||
| trace_probe_tmpl.h | ||
| trace_recursion_record.c | ||
| trace_sched_switch.c | ||
| trace_sched_wakeup.c | ||
| trace_selftest.c | ||
| trace_selftest_dynamic.c | ||
| trace_seq.c | ||
| trace_stack.c | ||
| trace_stat.c | ||
| trace_stat.h | ||
| trace_synth.h | ||
| trace_syscalls.c | ||
| trace_uprobe.c | ||
| tracing_map.c | ||
| tracing_map.h | ||