Before this commit, we would jump to the first column after receiving
the '\n' line feed character. This is not the correct behavior, as it
should only move the cursor now. Translating the typed Return key into
the correct CR LF ("\r\n") is the TTY's job, which was fixed in #7184.
Fixes#6820Fixes#6960
Problem:
- `BitmapView` permits changing the underlying `Bitmap`. This violates
the idea of a "view" since views are simply overlays which can
themselves change but do not change the underlying data.
Solution:
- Migrate all non-`const` member functions to Bitmap.
This simple driver simply finds a device in a device definitions list
and then sets up a SerialDevice instance based on the definition.
The driver currently only supports "WCH CH382 2S" pci serial boards,
as that is the only device available for me to test with, but most
other pci serial devices should be as easily addable as adding a
board_definitions entry.
The line control option bits (parity, stop bits, word length) were
masked and then combined incorrectly, resulting in them not being set
when requested.
These were accidentally the wrong way around (LSB part of the divisor
into the MSB register, MSB part of the divisor into the LSB register)
as can be seen in the specification (and in the comments themselves)
Unlike accept() the new accept4() system call lets the caller specify
flags for the newly accepted socket file descriptor, such as
SOCK_CLOEXEC and SOCK_NONBLOCK.
This commit adds support for the various ECHO* lflags and fixes some
POSIX conformance issues around newline handling. Also included are
error messages when setting not implemented settings.
Because we don't parse ACPI AML yet, If we are not able to shut down
the machine with "hacky" emulation methods - halt and print this state
to the users so they know they can shutdown the machine by themselves.
This fixes a bug that was reported on this discord server by
@ElectrodeYT - due to the confusion of passing arguments in different
orders, we messed up and triggered a page fault due to faulty sizes.
If we create a VGACompatibleAdapter object with a preset framebuffer,
Always assign the console so we can use it.
This is useful for modesetting done by a Multiboot loader, like GRUB.
As we removed the support of VBE modesetting that was done by GRUB early
on boot, we need to determine if we can modeset the resolution with our
drivers, and if not, we should enable text mode and ensure that
SystemServer knows about it too.
Also, SystemServer should first check if there's a framebuffer device
node, which is an indication that text mode was not even if it was
requested. Then, if it doesn't find it, it should check what boot_mode
argument the user specified (in case it's self-test). This way if we
try to use bochs-display device (which is not VGA compatible) and
request a text mode, it will not honor the request and will continue
with graphical mode.
Also try to print critical messages with mininum memory allocations
possible.
In LibVT, We make the implementation flexible for kernel-specific
methods that are implemented in ConsoleImpl class.
We used GRUB to modeset the resolution for a long time, but for good
reasons I see no point with keeping it supported in our kernel. We
support bochs-display device on QEMU (both the VGA compatible and
non-VGA compatible variants), so for QEMU we can still boot the system
in graphical mode even without GRUB help.
Also, we now have a native driver for Intel graphics and although it
doesn't support most Intel graphics cards out there yet, it's a good
starting point to support more cards. If a user wants to boot on
bare-metal in graphical mode, all he needs to do is to add the removed
flag back again, as the kernel still supports pre-set framebuffers.
This new subsystem is replacing the old code that was used to
create device nodes of framebuffer devices in /dev.
This subsystem includes for now 3 roles:
1. GraphicsManagement singleton object that is used in the boot
process to enumerate and initialize display devices.
2. GraphicsDevice(s) that are used to control the display adapter.
3. FramebufferDevice(s) that are used to control the device node in
/dev.
For now, we support the Bochs display adapter and any other
generic VGA compatible adapter that was configured by the boot
loader to a known and fixed resolution.
Two improvements in the Bochs display adapter code are that
we can support native bochs-display device (this device doesn't
expose any VGA capabilities) and also that we use the MMIO region,
to configure the device, instead of setting IO ports for such tasks.
This device is a graphics display device that is not supporting
VGA functionality.
Therefore, it exposes a MMIO region to configure it, so we use that
region to set the framebuffer resolution.
Previously ByteBuffer would internally hold a RefPtr to the byte
buffer and would behave like a reference type, i.e. copying a
ByteBuffer would not create a duplicate byte buffer, but rather
two objects which refer to the same internal buffer.
This also changes ByteBuffer so that it has some internal capacity
much like the Vector<T> type. Unlike Vector<T> however a byte
buffer's data may be uninitialized.
With this commit ByteBuffer makes use of the kmalloc_good_size()
API to pick an optimal allocation size for its internal buffer.
This non-POSIX header is used in Linux/BSD systems for storing the
default termios settings. This lets us setup new TTYs' `m_termios.c_cc`
in a nicer way than using a magic string.
This commit replaces the former, hand-written parser with a new one that
can be generated automatically according to a state change diagram.
The new `EscapeSequenceParser` class provides a more ergonomic interface
to dealing with escape sequences. This interface has been inspired by
Alacritty's [vte library](https://github.com/alacritty/vte/).
I tried to avoid changing the application logic inside the `Terminal`
class. While this code has not been thoroughly tested, I can't find
regressions in the basic command line utilities or `vttest`.
`Terminal` now displays nicer debug messages when it encounters an
unknown escape sequence. Defensive programming and bounds checks have
been added where we access parameters, and as a result, we can now
endure 4-5 seconds of `cat /dev/urandom`. :D
We generate EscapeSequenceStateMachine.h when building the in-kernel
LibVT, and we assume that the file is already in place when the userland
library is being built. This will probably cause problems later on, but
I can't find a way to do it nicely.
By constraining two implementations, the compiler will select the best
fitting one. All this will require is duplicating the implementation and
simplifying for the `void` case.
This constraining also informs both the caller and compiler by passing
the callback parameter types as part of the constraint
(e.g.: `IterationFunction<int>`).
Some `for_each` functions in LibELF only take functions which return
`void`. This is a minimal correctness check, as it removes one way for a
function to incompletely do something.
There seems to be a possible idiom where inside a lambda, a `return;` is
the same as `continue;` in a for-loop.
Regressed in 8a4cc735b9.
We stopped generating "process created" when enabling profiling,
which led to Profiler getting confused about the missing events.
Fixes off-by-one caused by reading the register directly
without adding a 1 to it, because AHCI reports 1 less port than
the actual number of ports supported.
This implements the macOS API malloc_good_size() which returns the
true allocation size for a given requested allocation size. This
allows us to make use of all the available memory in a malloc chunk.
For example, for a malloc request of 35 bytes our malloc would
internally use a chunk of size 64, however the remaining 29 bytes
would be unused.
Knowing the true allocation size allows us to request more usable
memory that would otherwise be wasted and make that available for
Vector, HashTable and potentially other callers in the future.
Previously calls to perf_event() would end up in a process-specific
perfcore file even though global profiling was enabled. This changes
the behavior for perf_event() so that these events are stored into
the global profile instead.
On my machine, it only sets PRC and not PCC.
Confirmed to happen on:
- 8086:9ca2 (Intel Corporation Wildcat Point-LP SATA Controller
[AHCI Mode] (rev 03))
On my bare metal machine, enabling it as this point causes it to
instantly send an interrupt, and we're too early in the process
to be able to handle AHCI interrupts. The interrupts were being
enabled in the initialize function anyway.
Confirmed to happen on:
- 8086:9ca2 (Intel Corporation Wildcat Point-LP SATA Controller
[AHCI Mode] (rev 03))
- 8086:3b22 (Intel Corporation 5 Series/3400 Series Chipset
6 port SATA AHCI Controller (rev 06))
Occasionally we'll see messages in the serial console like:
handle_tcp: unexpected flags in FinWait1 state
In these cases it would be nice to know what flags we are receiving that
we aren't expecting.
The following KUBSAN crash on startup was reported on discord:
```
UHCI: Started
KUBSAN: reference binding to null pointer of type struct UHCIController
KUBSAN: at ../../Kernel/Devices/USB/UHCIController.cpp, line 67
```
After inspecting the code, it became clear that there's a window of time
where the kernel task which monitors the UHCI port can startup and start
executing before the UHCIController constructor completes. This leaves
the singleton pointing to nullptr, thus in the duration of this race
window the "UHCI port proc" thread will go an and de-reference the null
pointer when trying to read for status changes on the UHCI root ports.
Reported-by: @stelar7
Reported-by: @bcoles
Fixes: #6154
AnonymousVMObject::create_with_physical_page(s) can't be NonnullRefPtr
as it allocates internally. Fixing the API then surfaced an issue in
ScatterGatherList, where the code was attempting to create an
AnonymousVMObject in the constructor which will not be observable
during OOM.
Fix all of these issues and start propagating errors at the callers
of the AnonymousVMObject and ScatterGatherList APis.
