Added filesHEADmaster

18 files changed, 1298 insertions, 0 deletions

diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000..1ff0c42
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..b06e864
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,212 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+
+# User-specific files
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+build/
+bld/
+[Bb]in/
+[Oo]bj/
+
+# Visual Studio 2015 cache/options directory
+.vs/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUNIT
+*.VisualState.xml
+TestResult.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# DNX
+project.lock.json
+artifacts/
+
+*_i.c
+*_p.c
+*_i.h
+*.ilk
+*.meta
+*.obj
+*.pch
+*.pdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opensdf
+*.sdf
+*.cachefile
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# JustCode is a .NET coding add-in
+.JustCode
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+## TODO: Comment the next line if you want to checkin your
+## web deploy settings but do note that will include unencrypted
+## passwords
+#*.pubxml
+
+*.publishproj
+
+# NuGet Packages
+*.nupkg
+# The packages folder can be ignored because of Package Restore
+**/packages/*
+# except build/, which is used as an MSBuild target.
+!**/packages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/packages/repositories.config
+
+# Windows Azure Build Output
+csx/
+*.build.csdef
+
+# Windows Store app package directory
+AppPackages/
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!*.[Cc]ache/
+
+# Others
+ClientBin/
+[Ss]tyle[Cc]op.*
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.pfx
+*.publishsettings
+node_modules/
+orleans.codegen.cs
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+
+# SQL Server files
+*.mdf
+*.ldf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# LightSwitch generated files
+GeneratedArtifacts/
+_Pvt_Extensions/
+ModelManifest.xml
diff --git a/HTML Editor.sln b/HTML Editor.sln
new file mode 100644
index 0000000..bd7a6ea
--- /dev/null
+++ b/HTML Editor.sln
@@ -0,0 +1,22 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 14
+VisualStudioVersion = 14.0.23107.0
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "HTML Editor", "HTML Editor\HTML Editor.vbproj", "{38056E71-4DD2-490B-8063-99D90FC927C3}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{38056E71-4DD2-490B-8063-99D90FC927C3}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{38056E71-4DD2-490B-8063-99D90FC927C3}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{38056E71-4DD2-490B-8063-99D90FC927C3}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{38056E71-4DD2-490B-8063-99D90FC927C3}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal
diff --git a/HTML Editor/App.config b/HTML Editor/App.config
new file mode 100644
index 0000000..6c57b2e
--- /dev/null
+++ b/HTML Editor/App.config
@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<configuration>
+    <startup>
+        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6" />
+    </startup>
+</configuration>
\ No newline at end of file
diff --git a/HTML Editor/Form1.Designer.vb b/HTML Editor/Form1.Designer.vb
new file mode 100644
index 0000000..86428e7
--- /dev/null
+++ b/HTML Editor/Form1.Designer.vb
@@ -0,0 +1,162 @@
+<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
+Partial Class Form1
+    Inherits System.Windows.Forms.Form
+
+    'Form overrides dispose to clean up the component list.
+    <System.Diagnostics.DebuggerNonUserCode()> _
+    Protected Overrides Sub Dispose(ByVal disposing As Boolean)
+        Try
+            If disposing AndAlso components IsNot Nothing Then
+                components.Dispose()
+            End If
+        Finally
+            MyBase.Dispose(disposing)
+        End Try
+    End Sub
+
+    'Required by the Windows Form Designer
+    Private components As System.ComponentModel.IContainer
+
+    'NOTE: The following procedure is required by the Windows Form Designer
+    'It can be modified using the Windows Form Designer.  
+    'Do not modify it using the code editor.
+    <System.Diagnostics.DebuggerStepThrough()> _
+    Private Sub InitializeComponent()
+        Me.MenuStrip1 = New System.Windows.Forms.MenuStrip()
+        Me.FileToolStripMenuItem = New System.Windows.Forms.ToolStripMenuItem()
+        Me.OpenToolStripMenuItem = New System.Windows.Forms.ToolStripMenuItem()
+        Me.SaveToolStripMenuItem = New System.Windows.Forms.ToolStripMenuItem()
+        Me.PreviewToolStripMenuItem = New System.Windows.Forms.ToolStripMenuItem()
+        Me.Button1 = New System.Windows.Forms.Button()
+        Me.Button2 = New System.Windows.Forms.Button()
+        Me.Button3 = New System.Windows.Forms.Button()
+        Me.RichTextBox1 = New System.Windows.Forms.RichTextBox()
+        Me.WebBrowser1 = New System.Windows.Forms.WebBrowser()
+        Me.AboutToolStripMenuItem = New System.Windows.Forms.ToolStripMenuItem()
+        Me.ExitToolStripMenuItem = New System.Windows.Forms.ToolStripMenuItem()
+        Me.MenuStrip1.SuspendLayout()
+        Me.SuspendLayout()
+        '
+        'MenuStrip1
+        '
+        Me.MenuStrip1.Items.AddRange(New System.Windows.Forms.ToolStripItem() {Me.FileToolStripMenuItem})
+        Me.MenuStrip1.Location = New System.Drawing.Point(0, 0)
+        Me.MenuStrip1.Name = "MenuStrip1"
+        Me.MenuStrip1.Size = New System.Drawing.Size(773, 24)
+        Me.MenuStrip1.TabIndex = 0
+        Me.MenuStrip1.Text = "MenuStrip1"
+        '
+        'FileToolStripMenuItem
+        '
+        Me.FileToolStripMenuItem.DropDownItems.AddRange(New System.Windows.Forms.ToolStripItem() {Me.OpenToolStripMenuItem, Me.SaveToolStripMenuItem, Me.PreviewToolStripMenuItem, Me.AboutToolStripMenuItem, Me.ExitToolStripMenuItem})
+        Me.FileToolStripMenuItem.Name = "FileToolStripMenuItem"
+        Me.FileToolStripMenuItem.Size = New System.Drawing.Size(37, 20)
+        Me.FileToolStripMenuItem.Text = "&File"
+        '
+        'OpenToolStripMenuItem
+        '
+        Me.OpenToolStripMenuItem.Name = "OpenToolStripMenuItem"
+        Me.OpenToolStripMenuItem.Size = New System.Drawing.Size(152, 22)
+        Me.OpenToolStripMenuItem.Text = "&Open"
+        '
+        'SaveToolStripMenuItem
+        '
+        Me.SaveToolStripMenuItem.Name = "SaveToolStripMenuItem"
+        Me.SaveToolStripMenuItem.Size = New System.Drawing.Size(152, 22)
+        Me.SaveToolStripMenuItem.Text = "&Save"
+        '
+        'PreviewToolStripMenuItem
+        '
+        Me.PreviewToolStripMenuItem.Name = "PreviewToolStripMenuItem"
+        Me.PreviewToolStripMenuItem.Size = New System.Drawing.Size(152, 22)
+        Me.PreviewToolStripMenuItem.Text = "&Preview"
+        '
+        'Button1
+        '
+        Me.Button1.Location = New System.Drawing.Point(22, 388)
+        Me.Button1.Name = "Button1"
+        Me.Button1.Size = New System.Drawing.Size(75, 23)
+        Me.Button1.TabIndex = 1
+        Me.Button1.Text = "Open"
+        Me.Button1.UseVisualStyleBackColor = True
+        '
+        'Button2
+        '
+        Me.Button2.Location = New System.Drawing.Point(115, 388)
+        Me.Button2.Name = "Button2"
+        Me.Button2.Size = New System.Drawing.Size(75, 23)
+        Me.Button2.TabIndex = 2
+        Me.Button2.Text = "Save"
+        Me.Button2.UseVisualStyleBackColor = True
+        '
+        'Button3
+        '
+        Me.Button3.Location = New System.Drawing.Point(209, 388)
+        Me.Button3.Name = "Button3"
+        Me.Button3.Size = New System.Drawing.Size(75, 23)
+        Me.Button3.TabIndex = 3
+        Me.Button3.Text = "Preview"
+        Me.Button3.UseVisualStyleBackColor = True
+        '
+        'RichTextBox1
+        '
+        Me.RichTextBox1.Location = New System.Drawing.Point(22, 42)
+        Me.RichTextBox1.Name = "RichTextBox1"
+        Me.RichTextBox1.Size = New System.Drawing.Size(356, 322)
+        Me.RichTextBox1.TabIndex = 4
+        Me.RichTextBox1.Text = ""
+        '
+        'WebBrowser1
+        '
+        Me.WebBrowser1.Location = New System.Drawing.Point(396, 42)
+        Me.WebBrowser1.MinimumSize = New System.Drawing.Size(20, 20)
+        Me.WebBrowser1.Name = "WebBrowser1"
+        Me.WebBrowser1.Size = New System.Drawing.Size(352, 322)
+        Me.WebBrowser1.TabIndex = 5
+        '
+        'AboutToolStripMenuItem
+        '
+        Me.AboutToolStripMenuItem.Name = "AboutToolStripMenuItem"
+        Me.AboutToolStripMenuItem.Size = New System.Drawing.Size(152, 22)
+        Me.AboutToolStripMenuItem.Text = "About"
+        '
+        'ExitToolStripMenuItem
+        '
+        Me.ExitToolStripMenuItem.Name = "ExitToolStripMenuItem"
+        Me.ExitToolStripMenuItem.Size = New System.Drawing.Size(152, 22)
+        Me.ExitToolStripMenuItem.Text = "Exit"
+        '
+        'Form1
+        '
+        Me.AutoScaleDimensions = New System.Drawing.SizeF(6.0!, 13.0!)
+        Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
+        Me.ClientSize = New System.Drawing.Size(773, 467)
+        Me.Controls.Add(Me.WebBrowser1)
+        Me.Controls.Add(Me.RichTextBox1)
+        Me.Controls.Add(Me.Button3)
+        Me.Controls.Add(Me.Button2)
+        Me.Controls.Add(Me.Button1)
+        Me.Controls.Add(Me.MenuStrip1)
+        Me.MainMenuStrip = Me.MenuStrip1
+        Me.Name = "Form1"
+        Me.Text = "HTML Editor"
+        Me.MenuStrip1.ResumeLayout(False)
+        Me.MenuStrip1.PerformLayout()
+        Me.ResumeLayout(False)
+        Me.PerformLayout()
+
+    End Sub
+
+    Friend WithEvents MenuStrip1 As MenuStrip
+    Friend WithEvents FileToolStripMenuItem As ToolStripMenuItem
+    Friend WithEvents OpenToolStripMenuItem As ToolStripMenuItem
+    Friend WithEvents SaveToolStripMenuItem As ToolStripMenuItem
+    Friend WithEvents PreviewToolStripMenuItem As ToolStripMenuItem
+    Friend WithEvents Button1 As Button
+    Friend WithEvents Button2 As Button
+    Friend WithEvents Button3 As Button
+    Friend WithEvents RichTextBox1 As RichTextBox
+    Friend WithEvents WebBrowser1 As WebBrowser
+    Friend WithEvents AboutToolStripMenuItem As ToolStripMenuItem
+    Friend WithEvents ExitToolStripMenuItem As ToolStripMenuItem
+End Class
diff --git a/HTML Editor/Form1.resx b/HTML Editor/Form1.resx
new file mode 100644
index 0000000..bb70361
--- /dev/null
+++ b/HTML Editor/Form1.resx
@@ -0,0 +1,123 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <metadata name="MenuStrip1.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+    <value>17, 17</value>
+  </metadata>
+</root>
\ No newline at end of file
diff --git a/HTML Editor/Form1.vb b/HTML Editor/Form1.vb
new file mode 100644
index 0000000..c932856
--- /dev/null
+++ b/HTML Editor/Form1.vb
@@ -0,0 +1,35 @@
+Public Class Form1
+    Private dlg As Object
+    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
+
+    End Sub
+
+    Private Sub OpenToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles OpenToolStripMenuItem.Click, Button1.Click
+        Dim open As New OpenFileDialog
+        open.Filter = "Website Files|*.htm;*.html"
+        If open.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
+            RichTextBox1.LoadFile(open.FileName)
+        Else
+            'Do Nothing
+        End If
+    End Sub
+
+    Private Sub SaveToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles SaveToolStripMenuItem.Click, Button2.Click
+        dlg.Filter = "Website Files|*.htm;*.html"
+        If dlg.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
+            RichTextBox1.SaveFile(dlg.FileName, RichTextBoxStreamType.RichText)
+        End If
+    End Sub
+
+    Private Sub PreviewToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles PreviewToolStripMenuItem.Click, Button3.Click
+        WebBrowser1.DocumentText = RichTextBox1.Text
+    End Sub
+
+    Private Sub ExitToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles ExitToolStripMenuItem.Click
+        Me.Close()
+    End Sub
+
+    Private Sub AboutToolStripMenuItem_Click(sender As Object, e As EventArgs) Handles AboutToolStripMenuItem.Click
+        Form2.Show()
+    End Sub
+End Class
diff --git a/HTML Editor/Form2.Designer.vb b/HTML Editor/Form2.Designer.vb
new file mode 100644
index 0000000..a2057e6
--- /dev/null
+++ b/HTML Editor/Form2.Designer.vb
@@ -0,0 +1,65 @@
+<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
+Partial Class Form2
+    Inherits System.Windows.Forms.Form
+
+    'Form overrides dispose to clean up the component list.
+    <System.Diagnostics.DebuggerNonUserCode()> _
+    Protected Overrides Sub Dispose(ByVal disposing As Boolean)
+        Try
+            If disposing AndAlso components IsNot Nothing Then
+                components.Dispose()
+            End If
+        Finally
+            MyBase.Dispose(disposing)
+        End Try
+    End Sub
+
+    'Required by the Windows Form Designer
+    Private components As System.ComponentModel.IContainer
+
+    'NOTE: The following procedure is required by the Windows Form Designer
+    'It can be modified using the Windows Form Designer.  
+    'Do not modify it using the code editor.
+    <System.Diagnostics.DebuggerStepThrough()> _
+    Private Sub InitializeComponent()
+        Me.Label1 = New System.Windows.Forms.Label()
+        Me.Button1 = New System.Windows.Forms.Button()
+        Me.SuspendLayout()
+        '
+        'Label1
+        '
+        Me.Label1.AutoSize = True
+        Me.Label1.Location = New System.Drawing.Point(26, 20)
+        Me.Label1.Name = "Label1"
+        Me.Label1.Size = New System.Drawing.Size(195, 13)
+        Me.Label1.TabIndex = 0
+        Me.Label1.Text = "HTML Editor by Andrew Lee 2016-2017"
+        '
+        'Button1
+        '
+        Me.Button1.Location = New System.Drawing.Point(82, 48)
+        Me.Button1.Name = "Button1"
+        Me.Button1.Size = New System.Drawing.Size(75, 23)
+        Me.Button1.TabIndex = 1
+        Me.Button1.Text = "OK"
+        Me.Button1.UseVisualStyleBackColor = True
+        '
+        'Form2
+        '
+        Me.AutoScaleDimensions = New System.Drawing.SizeF(6.0!, 13.0!)
+        Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
+        Me.ClientSize = New System.Drawing.Size(233, 83)
+        Me.Controls.Add(Me.Button1)
+        Me.Controls.Add(Me.Label1)
+        Me.MaximizeBox = False
+        Me.MinimizeBox = False
+        Me.Name = "Form2"
+        Me.Text = "About"
+        Me.ResumeLayout(False)
+        Me.PerformLayout()
+
+    End Sub
+
+    Friend WithEvents Label1 As Label
+    Friend WithEvents Button1 As Button
+End Class
diff --git a/HTML Editor/Form2.resx b/HTML Editor/Form2.resx
new file mode 100644
index 0000000..1af7de1
--- /dev/null
+++ b/HTML Editor/Form2.resx
@@ -0,0 +1,120 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file
diff --git a/HTML Editor/Form2.vb b/HTML Editor/Form2.vb
new file mode 100644
index 0000000..8d138dd
--- /dev/null
+++ b/HTML Editor/Form2.vb
@@ -0,0 +1,9 @@
+Public Class Form2
+    Private Sub Label1_Click(sender As Object, e As EventArgs) Handles Label1.Click
+
+    End Sub
+
+    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
+        Me.Close()
+    End Sub
+End Class
\ No newline at end of file
diff --git a/HTML Editor/HTML Editor.vbproj b/HTML Editor/HTML Editor.vbproj
new file mode 100644
index 0000000..a45cf7b
--- /dev/null
+++ b/HTML Editor/HTML Editor.vbproj
@@ -0,0 +1,138 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="14.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{38056E71-4DD2-490B-8063-99D90FC927C3}</ProjectGuid>
+    <OutputType>WinExe</OutputType>
+    <StartupObject>HTML_Editor.My.MyApplication</StartupObject>
+    <RootNamespace>HTML_Editor</RootNamespace>
+    <AssemblyName>HTML Editor</AssemblyName>
+    <FileAlignment>512</FileAlignment>
+    <MyType>WindowsForms</MyType>
+    <TargetFrameworkVersion>v4.6</TargetFrameworkVersion>
+    <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DocumentationFile>HTML Editor.xml</DocumentationFile>
+    <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <DefineDebug>false</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DocumentationFile>HTML Editor.xml</DocumentationFile>
+    <NoWarn>42016,41999,42017,42018,42019,42032,42036,42020,42021,42022</NoWarn>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OptionExplicit>On</OptionExplicit>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OptionCompare>Binary</OptionCompare>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OptionStrict>Off</OptionStrict>
+  </PropertyGroup>
+  <PropertyGroup>
+    <OptionInfer>On</OptionInfer>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Deployment" />
+    <Reference Include="System.Drawing" />
+    <Reference Include="System.Windows.Forms" />
+    <Reference Include="System.Xml" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="System.Net.Http" />
+  </ItemGroup>
+  <ItemGroup>
+    <Import Include="Microsoft.VisualBasic" />
+    <Import Include="System" />
+    <Import Include="System.Collections" />
+    <Import Include="System.Collections.Generic" />
+    <Import Include="System.Data" />
+    <Import Include="System.Drawing" />
+    <Import Include="System.Diagnostics" />
+    <Import Include="System.Windows.Forms" />
+    <Import Include="System.Linq" />
+    <Import Include="System.Xml.Linq" />
+    <Import Include="System.Threading.Tasks" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Form1.vb">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="Form1.Designer.vb">
+      <DependentUpon>Form1.vb</DependentUpon>
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="Form2.Designer.vb">
+      <DependentUpon>Form2.vb</DependentUpon>
+    </Compile>
+    <Compile Include="Form2.vb">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="My Project\AssemblyInfo.vb" />
+    <Compile Include="My Project\Application.Designer.vb">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Application.myapp</DependentUpon>
+    </Compile>
+    <Compile Include="My Project\Resources.Designer.vb">
+      <AutoGen>True</AutoGen>
+      <DesignTime>True</DesignTime>
+      <DependentUpon>Resources.resx</DependentUpon>
+    </Compile>
+    <Compile Include="My Project\Settings.Designer.vb">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Settings.settings</DependentUpon>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <EmbeddedResource Include="Form1.resx">
+      <DependentUpon>Form1.vb</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="Form2.resx">
+      <DependentUpon>Form2.vb</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="My Project\Resources.resx">
+      <Generator>VbMyResourcesResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.vb</LastGenOutput>
+      <CustomToolNamespace>My.Resources</CustomToolNamespace>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="My Project\Application.myapp">
+      <Generator>MyApplicationCodeGenerator</Generator>
+      <LastGenOutput>Application.Designer.vb</LastGenOutput>
+    </None>
+    <None Include="My Project\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <CustomToolNamespace>My</CustomToolNamespace>
+      <LastGenOutput>Settings.Designer.vb</LastGenOutput>
+    </None>
+    <None Include="App.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>
\ No newline at end of file
diff --git a/HTML Editor/My Project/Application.Designer.vb b/HTML Editor/My Project/Application.Designer.vb
new file mode 100644
index 0000000..f8d8f03
--- /dev/null
+++ b/HTML Editor/My Project/Application.Designer.vb
@@ -0,0 +1,38 @@
+'------------------------------------------------------------------------------
+' <auto-generated>
+'     This code was generated by a tool.
+'     Runtime Version:4.0.30319.42000
+'
+'     Changes to this file may cause incorrect behavior and will be lost if
+'     the code is regenerated.
+' </auto-generated>
+'------------------------------------------------------------------------------
+
+Option Strict On
+Option Explicit On
+
+
+Namespace My
+
+    'NOTE: This file is auto-generated; do not modify it directly.  To make changes,
+    ' or if you encounter build errors in this file, go to the Project Designer
+    ' (go to Project Properties or double-click the My Project node in
+    ' Solution Explorer), and make changes on the Application tab.
+    '
+    Partial Friend Class MyApplication
+
+        <Global.System.Diagnostics.DebuggerStepThroughAttribute()> _
+        Public Sub New()
+            MyBase.New(Global.Microsoft.VisualBasic.ApplicationServices.AuthenticationMode.Windows)
+            Me.IsSingleInstance = false
+            Me.EnableVisualStyles = true
+            Me.SaveMySettingsOnExit = true
+            Me.ShutDownStyle = Global.Microsoft.VisualBasic.ApplicationServices.ShutdownMode.AfterMainFormCloses
+        End Sub
+
+        <Global.System.Diagnostics.DebuggerStepThroughAttribute()> _
+        Protected Overrides Sub OnCreateMainForm()
+            Me.MainForm = Global.HTML_Editor.Form1
+        End Sub
+    End Class
+End Namespace
diff --git a/HTML Editor/My Project/Application.myapp b/HTML Editor/My Project/Application.myapp
new file mode 100644
index 0000000..1243847
--- /dev/null
+++ b/HTML Editor/My Project/Application.myapp
@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="utf-8"?>
+<MyApplicationData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+  <MySubMain>true</MySubMain>
+  <MainForm>Form1</MainForm>
+  <SingleInstance>false</SingleInstance>
+  <ShutdownMode>0</ShutdownMode>
+  <EnableVisualStyles>true</EnableVisualStyles>
+  <AuthenticationMode>0</AuthenticationMode>
+  <ApplicationType>0</ApplicationType>
+  <SaveMySettingsOnExit>true</SaveMySettingsOnExit>
+</MyApplicationData>
diff --git a/HTML Editor/My Project/AssemblyInfo.vb b/HTML Editor/My Project/AssemblyInfo.vb
new file mode 100644
index 0000000..9b04d5a
--- /dev/null
+++ b/HTML Editor/My Project/AssemblyInfo.vb
@@ -0,0 +1,35 @@
+Imports System
+Imports System.Reflection
+Imports System.Runtime.InteropServices
+
+' General Information about an assembly is controlled through the following 
+' set of attributes. Change these attribute values to modify the information
+' associated with an assembly.
+
+' Review the values of the assembly attributes
+
+<Assembly: AssemblyTitle("HTML Editor")>
+<Assembly: AssemblyDescription("")>
+<Assembly: AssemblyCompany("")>
+<Assembly: AssemblyProduct("HTML Editor")>
+<Assembly: AssemblyCopyright("Copyright ©  2016")>
+<Assembly: AssemblyTrademark("")>
+
+<Assembly: ComVisible(False)>
+
+'The following GUID is for the ID of the typelib if this project is exposed to COM
+<Assembly: Guid("8c73bd3b-e5d9-4c5f-805c-25d127bc6e6d")>
+
+' Version information for an assembly consists of the following four values:
+'
+'      Major Version
+'      Minor Version 
+'      Build Number
+'      Revision
+'
+' You can specify all the values or you can default the Build and Revision Numbers 
+' by using the '*' as shown below:
+' <Assembly: AssemblyVersion("1.0.*")> 
+
+<Assembly: AssemblyVersion("1.0.0.0")>
+<Assembly: AssemblyFileVersion("1.0.0.0")>
diff --git a/HTML Editor/My Project/Resources.Designer.vb b/HTML Editor/My Project/Resources.Designer.vb
new file mode 100644
index 0000000..92ebab5
--- /dev/null
+++ b/HTML Editor/My Project/Resources.Designer.vb
@@ -0,0 +1,62 @@
+'------------------------------------------------------------------------------
+' <auto-generated>
+'     This code was generated by a tool.
+'     Runtime Version:4.0.30319.42000
+'
+'     Changes to this file may cause incorrect behavior and will be lost if
+'     the code is regenerated.
+' </auto-generated>
+'------------------------------------------------------------------------------
+
+Option Strict On
+Option Explicit On
+
+
+Namespace My.Resources
+
+    'This class was auto-generated by the StronglyTypedResourceBuilder
+    'class via a tool like ResGen or Visual Studio.
+    'To add or remove a member, edit your .ResX file then rerun ResGen
+    'with the /str option, or rebuild your VS project.
+    '''<summary>
+    '''  A strongly-typed resource class, for looking up localized strings, etc.
+    '''</summary>
+    <Global.System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0"), _
+     Global.System.Diagnostics.DebuggerNonUserCodeAttribute(), _
+     Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute(), _
+     Global.Microsoft.VisualBasic.HideModuleNameAttribute()> _
+    Friend Module Resources
+
+        Private resourceMan As Global.System.Resources.ResourceManager
+
+        Private resourceCulture As Global.System.Globalization.CultureInfo
+
+        '''<summary>
+        '''  Returns the cached ResourceManager instance used by this class.
+        '''</summary>
+        <Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
+        Friend ReadOnly Property ResourceManager() As Global.System.Resources.ResourceManager
+            Get
+                If Object.ReferenceEquals(resourceMan, Nothing) Then
+                    Dim temp As Global.System.Resources.ResourceManager = New Global.System.Resources.ResourceManager("HTML_Editor.Resources", GetType(Resources).Assembly)
+                    resourceMan = temp
+                End If
+                Return resourceMan
+            End Get
+        End Property
+
+        '''<summary>
+        '''  Overrides the current thread's CurrentUICulture property for all
+        '''  resource lookups using this strongly typed resource class.
+        '''</summary>
+        <Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
+        Friend Property Culture() As Global.System.Globalization.CultureInfo
+            Get
+                Return resourceCulture
+            End Get
+            Set(ByVal value As Global.System.Globalization.CultureInfo)
+                resourceCulture = value
+            End Set
+        End Property
+    End Module
+End Namespace
diff --git a/HTML Editor/My Project/Resources.resx b/HTML Editor/My Project/Resources.resx
new file mode 100644
index 0000000..af7dbeb
--- /dev/null
+++ b/HTML Editor/My Project/Resources.resx
@@ -0,0 +1,117 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file
diff --git a/HTML Editor/My Project/Settings.Designer.vb b/HTML Editor/My Project/Settings.Designer.vb
new file mode 100644
index 0000000..5d72fa7
--- /dev/null
+++ b/HTML Editor/My Project/Settings.Designer.vb
@@ -0,0 +1,73 @@
+'------------------------------------------------------------------------------
+' <auto-generated>
+'     This code was generated by a tool.
+'     Runtime Version:4.0.30319.42000
+'
+'     Changes to this file may cause incorrect behavior and will be lost if
+'     the code is regenerated.
+' </auto-generated>
+'------------------------------------------------------------------------------
+
+Option Strict On
+Option Explicit On
+
+
+Namespace My
+
+    <Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute(), _
+     Global.System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "11.0.0.0"), _
+     Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
+    Partial Friend NotInheritable Class MySettings
+        Inherits Global.System.Configuration.ApplicationSettingsBase
+
+        Private Shared defaultInstance As MySettings = CType(Global.System.Configuration.ApplicationSettingsBase.Synchronized(New MySettings), MySettings)
+
+#Region "My.Settings Auto-Save Functionality"
+#If _MyType = "WindowsForms" Then
+        Private Shared addedHandler As Boolean
+
+        Private Shared addedHandlerLockObject As New Object
+
+        <Global.System.Diagnostics.DebuggerNonUserCodeAttribute(), Global.System.ComponentModel.EditorBrowsableAttribute(Global.System.ComponentModel.EditorBrowsableState.Advanced)> _
+        Private Shared Sub AutoSaveSettings(ByVal sender As Global.System.Object, ByVal e As Global.System.EventArgs)
+            If My.Application.SaveMySettingsOnExit Then
+                My.Settings.Save()
+            End If
+        End Sub
+#End If
+#End Region
+
+        Public Shared ReadOnly Property [Default]() As MySettings
+            Get
+
+#If _MyType = "WindowsForms" Then
+                   If Not addedHandler Then
+                        SyncLock addedHandlerLockObject
+                            If Not addedHandler Then
+                                AddHandler My.Application.Shutdown, AddressOf AutoSaveSettings
+                                addedHandler = True
+                            End If
+                        End SyncLock
+                    End If
+#End If
+                Return defaultInstance
+            End Get
+        End Property
+    End Class
+End Namespace
+
+Namespace My
+
+    <Global.Microsoft.VisualBasic.HideModuleNameAttribute(), _
+     Global.System.Diagnostics.DebuggerNonUserCodeAttribute(), _
+     Global.System.Runtime.CompilerServices.CompilerGeneratedAttribute()> _
+    Friend Module MySettingsProperty
+
+        <Global.System.ComponentModel.Design.HelpKeywordAttribute("My.Settings")> _
+        Friend ReadOnly Property Settings() As Global.HTML_Editor.My.MySettings
+            Get
+                Return Global.HTML_Editor.My.MySettings.Default
+            End Get
+        End Property
+    End Module
+End Namespace
diff --git a/HTML Editor/My Project/Settings.settings b/HTML Editor/My Project/Settings.settings
new file mode 100644
index 0000000..85b890b
--- /dev/null
+++ b/HTML Editor/My Project/Settings.settings
@@ -0,0 +1,7 @@
+<?xml version='1.0' encoding='utf-8'?>
+<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)" UseMySettingsClassName="true">
+  <Profiles>
+    <Profile Name="(Default)" />
+  </Profiles>
+  <Settings />
+</SettingsFile>