Also handle native and compatibility channel modes together, so if only
one IDE channel was set to work on PCI native mode, we need to handle it
separately, so the other channel continue to operate with the legacy IO
ports and interrupt line.
This is a "quirk" I've observed on a Intel ICH7 test machine. Apparently
we need to select the device (master or slave) before starting to work
with the bus master register.
It's very possible that other machines are requiring this step to happen
before the DMA transfer can occur correctly.
Also, when reading with DMA, we should set the transfer direction before
clearing the interrupt status.
For the sake of completeness, I added a few lines in places that I
deemed it to be reasonable to clear the interrupt status there.
Although unlikely to happen, a user can have an IDE controller that
doesn't support bus master capability. If that's the case, we need to
check for this, and create an IDEChannel (not BMIDEChannel) to allow
IO operations with the controller.
If the user requests to force PIO mode, we just create IDEChannel
objects which are capable of sending PIO commands only.
However, if the user doesn't force PIO mode, we create BMIDEChannel
objects, which are sending DMA commands.
This change is somewhat simplifying the code, so each class is
supporting its type of operation - PIO or DMA. The PATADiskDevice
should not care if DMA is enabled or not.
Later on, we could write an IDEChannel class for UDMA modes,
that are available and documented on Intel specifications for their IDE
controllers.
