1 files changed, 218 insertions, 0 deletions
diff --git a/gcc-1.40/config/tm-sun386.h b/gcc-1.40/config/tm-sun386.h
new file mode 100644
index 0000000..0b54855
--- /dev/null
+++ b/gcc-1.40/config/tm-sun386.h
@@ -0,0 +1,218 @@
+/* Definitions for Sun assembler syntax for the Intel 80386.
+   Copyright (C) 1988 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING.  If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+
+#define TARGET_VERSION fprintf (stderr, " (80386, Sun syntax)");
+
+/* Define the syntax of instructions and addresses.  */
+
+/* Define some concatenation macros to concatenate an opcode
+   and one, two or three operands.  In other assembler syntaxes
+   they may alter the order of ther operands.  */
+
+#ifdef __STDC__
+#define AS2(a,b,c) #a " " #b "," #c
+#define AS3(a,b,c,d) #a " " #b "," #c "," #d
+#define AS1(a,b) #a " " #b
+#else
+#define AS1(a,b) "a b"
+#define AS2(a,b,c) "a b,c"
+#define AS3(a,b,c,d) "a b,c,d"
+#endif  
+
+/* Output the size-letter for an opcode.
+   CODE is the letter used in an operand spec (L, B, W, S or Q).
+   CH is the corresponding lower case letter
+     (except if CODE is L then CH is `l').  */
+#define PUT_OP_SIZE(CODE,CH,FILE) putc (CH,(FILE))
+
+/* Opcode suffix for fullword insn.  */
+#define L_SIZE "l"
+
+/* Prefix for register names in this syntax.  */
+#define RP "%"
+
+/* Prefix for immediate operands in this syntax.  */
+#define IP "$"
+
+/* Prefix for internally generated assembler labels.  */
+#define LPREFIX ".L"
+
+/* Output the prefix for an immediate operand, or for an offset operand.  */
+#define PRINT_IMMED_PREFIX(FILE)  fputs ("$", (FILE))
+#define PRINT_OFFSET_PREFIX(FILE)  fputs ("$", (FILE))
+
+/* Indirect call instructions should use `*'.  */
+#define USE_STAR 1
+
+/* Prefix for a memory-operand X.  */
+#define PRINT_PTR(X, FILE)
+
+/* Delimiters that surround base reg and index reg.  */
+#define ADDR_BEG(FILE) putc('(', (FILE))
+#define ADDR_END(FILE) putc(')', (FILE))
+
+/* Print an index register (whose rtx is IREG).  */
+#define PRINT_IREG(FILE,IREG) \
+  do								\
+  { fputs (",", (FILE)); PRINT_REG ((IREG), 0, (FILE)); }	\
+  while (0)
+  
+/* Print an index scale factor SCALE.  */
+#define PRINT_SCALE(FILE,SCALE) \
+  if ((SCALE) != 1) fprintf ((FILE), ",%d", (SCALE))
+
+/* Print a base/index combination.
+   BREG is the base reg rtx, IREG is the index reg rtx,
+   and SCALE is the index scale factor (an integer).  */
+
+#define PRINT_B_I_S(BREG,IREG,SCALE,FILE) \
+  { ADDR_BEG (FILE); 				\
+    if (BREG) PRINT_REG ((BREG), 0, (FILE));	\
+    if ((IREG) != 0)				\
+      { PRINT_IREG ((FILE), (IREG));		\
+        PRINT_SCALE ((FILE), (SCALE)); }	\
+    ADDR_END (FILE); }
+
+/* Define the syntax of pseudo-ops, labels and comments.  */
+
+/* Assembler pseudos to introduce constants of various size.  */
+
+#define ASM_BYTE "\t.byte\t"
+#define ASM_SHORT "\t.value\t"
+#define ASM_LONG "\t.long\t"
+#define ASM_DOUBLE "\t.double\t"
+
+/* String containing the assembler's comment-starter.  */
+
+#define COMMENT_BEGIN "/"
+
+/* Output at beginning of assembler file.  */
+/* The .file command should always begin the output.  */
+
+#undef ASM_FILE_START
+#define ASM_FILE_START(FILE) \
+  do {							\
+    extern char *version_string, *language_string;	\
+    {							\
+      int len = strlen (dump_base_name);		\
+      char *na = dump_base_name + len;			\
+      char shorter[15];					\
+      /* NA gets DUMP_BASE_NAME sans directory names.  */\
+      while (na > dump_base_name)			\
+	{						\
+	  if (na[-1] == '/')				\
+	    break;					\
+	  na--;						\
+	}						\
+      strncpy (shorter, na, 14);			\
+      shorter[14] = 0;					\
+      fprintf (FILE, "\t.file\t\"%s\"\n", shorter);	\
+    }							\
+    fprintf (FILE, "\t.version\t\"%s %s\"\n",		\
+	     language_string, version_string);		\
+    if (optimize) ASM_FILE_START_1 (FILE);		\
+  } while (0)
+
+#define ASM_FILE_START_1(FILE) fprintf (FILE, "\t.optim\n")
+
+/* Output to assembler file text saying following lines
+   may contain character constants, extra white space, comments, etc.  */
+
+#define ASM_APP_ON "/APP\n"
+
+/* Output to assembler file text saying following lines
+   no longer contain unusual constructs.  */
+
+#define ASM_APP_OFF "/NO_APP\n"
+
+/* This is how to output an assembler line
+   that says to advance the location counter
+   to a multiple of 2**LOG bytes.  */
+
+#define ASM_OUTPUT_ALIGN(FILE,LOG)	\
+    if ((LOG)!=0) fprintf ((FILE), "\t.align %d\n", 1<<(LOG))
+
+/* This is how to output an assembler line
+   that says to advance the location counter by SIZE bytes.  */
+
+#define ASM_OUTPUT_SKIP(FILE,SIZE)  \
+  fprintf ((FILE), "\t.set\t.,.+%u\n", (SIZE))
+
+/* Output before read-only data.  */
+
+#define TEXT_SECTION_ASM_OP "\t.text"
+
+/* Output before writable data.  */
+
+#define DATA_SECTION_ASM_OP "\t.data"
+
+/* Define the syntax of labels and symbol definitions/declarations.  */
+
+/* This says how to output an assembler line
+   to define a global common symbol.  */
+
+#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED)  \
+( fputs (".comm ", (FILE)),			\
+  assemble_name ((FILE), (NAME)),		\
+  fprintf ((FILE), ",%u\n", (ROUNDED)))
+
+/* This says how to output an assembler line
+   to define a local common symbol.  */
+
+#define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED)  \
+( fputs (".lcomm ", (FILE)),			\
+  assemble_name ((FILE), (NAME)),		\
+  fprintf ((FILE), ",%u\n", (ROUNDED)))
+
+/* This is how to store into the string BUF
+   the symbol_ref name of an internal numbered label where
+   PREFIX is the class of label and NUM is the number within the class.
+   This is suitable for output with `assemble_name'.  */
+
+#define ASM_GENERATE_INTERNAL_LABEL(BUF,PREFIX,NUMBER)	\
+  sprintf ((BUF), ".%s%d", (PREFIX), (NUMBER))
+
+/* This is how to output a reference to a user-level label named NAME.  */
+
+#define ASM_OUTPUT_LABELREF(FILE,NAME)	\
+  fprintf (FILE, "%s", NAME)
+
+/* This is how to output an internal numbered label where
+   PREFIX is the class of label and NUM is the number within the class.  */
+
+#define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM)	\
+  fprintf (FILE, ".%s%d:\n", PREFIX, NUM)
+
+/* This is how to output a command to make the user-level label named NAME
+   defined for reference from other files.  */
+
+#define ASM_GLOBALIZE_LABEL(FILE,NAME)	\
+  (fputs ("\t.globl\t", FILE), assemble_name (FILE, NAME), fputs ("\n", FILE))
+
+/* How to output an ASCII string constant.  */
+
+#define ASM_OUTPUT_ASCII(FILE, p, size) \
+{ int i=0; 						\
+  while (i < size)					\
+    { if (i%10 == 0) { if (i!=0) fprintf (FILE, "\n");	\
+		       fprintf (FILE, ASM_BYTE); }	\
+      else fprintf (FILE, ",");				\
+	fprintf (FILE, "0x%x",(p[i++] & 0377)) ;}	\
+      fprintf (FILE, "\n"); }